OOB-30 Dry bearing Steel ronze Powder with PI/PEEKPEEK BushingSteel bronze powder PEEK/filler Boundary lubricatingProduce Overview:Apply to the oil fuel work harder parts,wear resustance,low coefficient of friction,long life;good overall performance.Apply to the oil or fuel work harder parts,wear resistance,low coefficient of friction,long life;good overall performance.With the PEEK PTFE thickness of 0.30-0.50mm, it provides high wear resistance and low friction even only minute quantities of lubricants are supplied. This bearing surface carries a pattern of circular indents which should be filled with grease on assembly of the bearings.Bronze layer thickness is 0.20-0.35mm. It provides max. thermal conductrivity away from the bearing surface, also serves as a reservoir for the PEEK/PTFE mixture.Steel Backing provides mechanical strength and high load carrying capacity, with the Copper or Tin plating of 0.002mm, the bearing surface is corrosion resistance.1.PTFE 0.30~0.50mm, gives high wear resistance and low friction even only minute quantities of lubricant are supplied. This bearing surface carries a pattern of circular indents which should be filled with grease on assembly of the bearing.2.Bronze layer 0.20~0.35mm, provides max. thermal conductivity away from the bearing surface, also serves as a reservoir for the PTFE/PEEK mixture.3 . S t e e l b a c k i n g , provides mechanical strength and high l o a d c a r r y i n g capacity.4 . C o p p e r / T i n plating 0.002mm, p r o v i d e s g o o d corrosion resistance. PEEK

Business Location: