Flatcar Through Type Machine is mainly used for cleaning and strengthening of large-scale steel structure building and summoned the surface and is more suitable for super large, super long and super heavy thick surface derusting and surface oxide skin cleaning, widely used in casting, forging, machinery, iron and steel industry.At the same time, through the structure, reducing the door opening and closing time, improve production efficiency, and is especially suitable for pipelining. Flat car of the company's production, divided into traction and self driven two modes of motion, the maximum load of up to 300 tonsQ76 series of Flatcar Through Type Machine according to user requirements design of shot blasting of the workpiece production of cleaning equipment, can be used for large castings, forgings and blast cleaning and strengthening of structures, in order to remove the workpiece surface and the inner cavity of the sticky sand, rust, scale, dirt, showing the color of the metal surface of the workpiece. At the same time, can eliminate the internal stress, improve the anti fatigue performance and surface strength, increase the adhesion of the paint painting of the workpiece, and ultimately improve the workpiece surface and to internal quality.This machine has the following characteristics: This machine has the following characteristics: Layout of blast chamber and blasting machine through computer the 3D dynamic simulation after determining the projectile Centrifugal Cantilever Curved propellers with high blasting speed American pan state company technology, can significantly improve the cleaning efficiency, satisfactory Clean up the quality of the separation device using the most advanced curtain screen type pill slag separator, can significantly improve the separation effect of the car body is reasonable, stable and reliable, good sealing effect, the company has many years of practice proved good use, durable, the company series of design ideas, the use of automatic safety protection, advanced Swiss GF production technology, so as to make the machine with advanced structure, reasonable design, reliable operation, high production efficiencyThe application range of shot blasting machineItemUnitQ765CQ7610CQ7620CQ7630CSize of workpiecemmΦ2000*1000Φ2500*1500*280Φ4000*3000*700Φ4000*2000Loading of flatcarKg5000100002000030000Shot blastig capacityKg/min2*2503*2504*2505*250PressureMpa0.5-0.60.5-0.60.5-0.60.5-0.6Compressed air consumptionM3/min6.56.56.56.5lifting capacityt/h30456075Amount of separatet/h60456075VentilationM3/h16000200002500030000Power(not include the dust collector)kw5472911151 metal surface cleaningShot blasting equipment is first applied to the foundry cast steel, cast steel, cast iron to remove surface adhering sand and scale almost all of the gray cast iron, malleable iron, ductile iron castings have shot blasting treatment. It is not only in order to remove the surface oxide skin and sand casting, casting quality inspection preparation procedure is also indispensable before for example, large gas turbine casing must be strictly shot blasting cleaning before the non-destructive testing, to ensure the reliability of testing results. In general casting production, shot blasting is the discovery of surface defects of castings such as subcutaneous gas hole, slag hole and sand, cold insulation, leather and other essential technological means. Non-ferrous metal castings, such as aluminum alloy, copper alloy, surface cleaning, in addition to removal of skin, found the surface defects of castings, the main purpose is to remove the pressure casting to shot blasting burr and has installed The surface quality of Huang meaning, comprehensive effect.In iron and steel production in the metallurgical, throwing blasting or acid pickling is to ensure a large number of iron and steel production in high productivity and the use of mechanical or chemical combined removal of a technological method of phosphorus skin. Silicon steel sheet, stainless steel sheet and other alloy steel plate, with the production, in the process of cold rolling process must be annealed for blasting or acid pickling processing, to ensure the cold rolled steel surface roughness and thickness accuracy.2 strengthening of metal workpieceAccording to the theory of modern metal strength, increase the metal internal dislocation density is the main direction to improve the strength of metal. Practice has proved that the shot is the increase of the dislocation structure, effective process. This metal cannot pass through the transformation hardening (such as martensitic quenching, etc.) or to realize the transformation hardening based on Further Strengthening and requirements of the workpiece, but also has very important significance. Aviation, aerospace industry, automobile, tractor spare parts requirements lightweight, but the reliability requirements of increasingly high, the important technological measure is the use of throwing shot peening process to improve the structural strength and fatigue strength.Q76 Flatcar Through Type Machine is used for cleaning and strengthening the surface of the steel structural parts and castings, more applicable to the thickness of the billet surface derusting and surface oxide skin cleaning, widely used in casting, forging, machinery, iron and steel industry.Technical parameters: Q76 Flatcar Through Type Machine equipment is used for cleaning and strengthening the surface of the steel structural parts and castings, more applicable to the thickness of the billet surface derusting and surface oxide skin cleaning, widely used in casting, forging, machinery, iron and steel industry.

Business Location: