Basic InfoModel NO.:AJ-S1004Type:Security Alarm HostUsage:Fire,Website:.anka-security.com, SmokeOrigin:Shenzhen, ChinaWorking Voltage:24-Volt OperationZones:4Production Capacity:20000PCS/Month Conventional Fire Alarm Control Panel with 4zones/8zones/16zones1.4/8/16 zones modules for user to select, each zone can connect max. 25 conventional detectors. 2.1, 2, 4build in sound output3. General alarm. Trouble and Supervisory, relay output. 4. Two supervisory input with DC12V output, ideal to connect security alarm devices. FeaturesAC POWER: 90 to 270VAC, 50Hz, 3.0amps.Wire size：minimum 14AWG(2.0mm2) with 600-volt insulation.BATTERY: Sealed lead-acid batteries onlyMaximum charging circuit: 27.6VDC @ 0.8 amp for normal flat charge.Maximum battery charger capacity: 18AH battery.FeaturesFour to Sixteen style B (Class B) initiating device circuits (IDCs).All zones accept two-wire smoke detectors and any normally open contact devices.Zones 1-16 configured as general alarm zones.All circuits are power-limited and supervised, meeting the latest ULC requirements using fuseless technology.Two built-in, style Y (Class B) Notification Appliance (signal) circuits (NACs).NACs may be programmed: silenceable, Non-silenceable, Auto-silence1.25 amps of NAC power, 3.00 amps of total system power.Alarm, trouble and supervisory, relay output, 24volt operation.Resettable four-wire smoke detector power @ 500mA. Non-resettable power @ 500mAIntegral battery charger capable of charging up to 18AH batteries (batteries over 4AH)Require use of the external battery backbox or ULC listed equivalent).Disable/enable control per IDCReverse polarity protection.

Business Location: